Would you like to create and adjust your Facebook feeds just by asking an AI assistant like ChatGPT or Claude?
In this guide, we’ll walk you through connecting Custom Facebook Feed to your AI assistant and deciding whether it can make changes. All you need is Custom Facebook Feed and a WordPress site your assistant can reach.
Requirements: AI Agents requires Custom Facebook Feed Pro 4.15.0 or higher, or the free Custom Facebook Feed plugin version 4.15.0 or higher. On Custom Facebook Feed Pro, AI Agents works with any license level. You’ll also need WordPress 6.9 or higher.
Before you get started, Custom Facebook Feed must be installed and activated on your WordPress site. If you use the free plugin, see our guide on setting up the free Custom Facebook Feed plugin. You’ll also need at least one Facebook Page connected.
Custom Facebook Feed works with AI assistants through WPVibe, a free plugin that connects AI assistants to WordPress. Your assistant can always read your feeds and settings. It can only make changes after you turn on MCP Write Access.
Here is what we will cover.
- Connecting Your AI Assistant with WPVibe
- Letting Your AI Assistant Make Changes
- Prompts You Can Copy
- Deleting Feeds with Your AI Assistant
- Frequently Asked Questions
Connecting Your AI Assistant with WPVibe
To get started, go to Facebook Feed » Settings in your WordPress dashboard.

On the General tab, scroll down to the AI Agents section. If WPVibe isn’t installed yet, click Install WPVibe for free. This installs and activates WPVibe in one step. If WPVibe is installed but not active, the same button reads Activate WPVibe instead.

Once WPVibe is active, the section reads “WPVibe is connected to Facebook Feed.” Next, click Open WPVibe.

On the WPVibe page, follow the steps to add WPVibe to your AI assistant and connect your site.
For step-by-step instructions for each assistant, see WPVibe’s guide on setting up your AI client.
Note: Your site needs to be publicly reachable over HTTPS, because WPVibe connects to it over the internet. If your site doesn’t use HTTPS yet, see How to Properly Move WordPress from HTTP to HTTPS for a step-by-step guide.
To test the connection, ask your assistant which Facebook Pages are connected to your site. If everything is working, it lists each connected Page by its name.
Letting Your AI Assistant Make Changes
By default, your AI assistant can read your feeds, settings, and connected Pages. It can’t change anything until you decide it can.
Turning on MCP Write Access lets it create and edit feeds for you. If you only want your assistant to answer questions about your feeds, leave it off. If you’re not sure, start with it off. You can turn it on later, when you want your assistant to make a change.
Next, go back to the Facebook Feed Settings page. Just below the AI Agents section, turn on the MCP Write Access toggle.

Then, click Save Changes at the top of the page.

While MCP Write Access is off, Custom Facebook Feed turns down any change your assistant asks for. Your feeds and settings stay as they are.
Prompts You Can Copy
Once your assistant is connected, you can ask it for things in plain language. Here are a few requests to try.
- To see which Pages are connected, ask
Which Facebook Pages are connected to my site? - To list your feeds, ask
List my Facebook feeds. - To create a feed, ask
Create a Facebook feed called Homepage Feed using my connected Page. - To change a feed, ask
Change my Homepage Feed to show 6 posts. - To connect another Page, ask
Give me a link to connect another Facebook Page.
Your assistant creates timeline feeds, which show the posts from your Page. To make another type of feed, use the feed builder instead.
To see the feeds your assistant creates, go to Facebook Feed » All Feeds. Each feed is listed with its shortcode.

To show a feed on your site, add its shortcode to any page, post, or widget. For the steps, see our guide on displaying your Facebook feed on a page, post, or widget.
Once MCP Write Access is on, you can also ask your assistant to connect another Page. It gives you a link to open in the browser where you’re logged in to WordPress. The link works once and expires after 15 minutes.
Your assistant never sees your login details, because you sign in to Facebook yourself. Afterward, you return to the Facebook Feed Settings page, where you choose the Pages to connect.
Deleting Feeds with Your AI Assistant
Your AI assistant can’t delete a feed on its own. When you ask it to delete one while MCP Write Access is on, it gives you a confirmation link instead. The link works once and expires after 15 minutes.
Next, open the link in the browser where you’re logged in to WordPress. The confirmation page names the feed your assistant asked to delete and shows its shortcode. This lets you check it’s the right one. Then, click Delete feed.

Deleting the feed removes it and its caches and takes you to the All Feeds page. A deleted feed can’t be restored. Your Facebook Page stays connected.
Nothing is deleted until you confirm. If you’d rather keep the feed, the Cancel button takes you back to All Feeds and the feed stays untouched.
Note: Only one feed can wait for confirmation at a time. Asking to delete another feed cancels the link that’s still waiting, so confirm each one before you ask your assistant to delete the next.
That’s it! You’ve connected Custom Facebook Feed to your AI assistant and decided whether it can make changes. If you also use Instagram Feed, take a look at our guide on managing Instagram Feed with AI assistants.
Frequently Asked Questions
Below, we’ve answered some of the most common questions about managing Custom Facebook Feed with AI assistants.
Which AI assistants can I use?
You can use any assistant that connects to WordPress through WPVibe, such as ChatGPT, Claude, and Cursor, or any other MCP client.
Does this work with the free Custom Facebook Feed plugin?
Yes. The free Custom Facebook Feed plugin 4.15.0 and later also has the AI Agents section on the General tab, which installs WPVibe for you. Some feed settings are only in Custom Facebook Feed Pro. To compare them, see the differences between the free and Pro plugins.
What can my AI assistant do while MCP Write Access is off?
It can read your feeds and their settings, your plugin-wide settings, and your connected Pages. For each Page, it sees the name, the type, when the connection expires, whether it has an error, and how many feeds use it.
The tools that make changes don’t show up for your assistant until you turn MCP Write Access on.
What can my AI assistant change once MCP Write Access is on?
It can create feeds and change their settings. On Custom Facebook Feed Pro, these include a feed’s layout, columns, number of posts, header, Like Box, Load More button, and colors.
It can also change which connected Pages a feed shows. Beyond feeds, it can update plugin-wide settings like the caching schedule, GDPR mode, image handling, and script loading.
Can my AI assistant see my Facebook login or access tokens?
No. Custom Facebook Feed never shares access tokens or account credentials with your assistant. When you connect a Page, you sign in to Facebook yourself through a link in your browser.
What if WPVibe doesn’t install?
If the install doesn’t finish, the AI Agents section shows a Try again button and a link to the Plugins screen. You can install WPVibe yourself there.
Why can’t my AI assistant see Custom Facebook Feed?
Custom Facebook Feed’s AI abilities need WordPress 6.9 or higher. Check your WordPress version first. The AI Agents section reads “WPVibe is connected to Facebook Feed.” as soon as WPVibe is active. It doesn’t check your WordPress version.
Once your site runs WordPress 6.9 or higher, ask your assistant which Facebook Pages are connected to your site.
What if my deletion link doesn’t work?
Each deletion link works once and expires after 15 minutes. It also only works for the WordPress account you connected to WPVibe, and only while MCP Write Access is on.
Turning MCP Write Access off cancels every link that’s still waiting, and turning it back on doesn’t bring them back. If a link doesn’t work, ask your assistant for a new one.
How do I stop my AI assistant from changing my Facebook feeds?
In your WordPress dashboard, go to Facebook Feed » Settings. From here, turn off the MCP Write Access toggle. Then, click Save Changes.
Your assistant can still read your feeds and settings.
Can I use this on a local test site?
A site that only runs on your computer needs a public address first, because WPVibe reaches your site over the internet.
For more details, see WPVibe’s guide on connecting a local site.