How to install the Multifeed extension and combine posts from several Facebook pages into a single feed.
Would you like to show posts from several Facebook Pages in the same WordPress feed?
This guide shows you how to use the Multifeed extension to select more than one source for a feed. We’ll also cover how to add or remove sources later, how to show events from several Pages, and how to choose how many posts show.
Requirements: Selecting more than one source comes from the Multifeed extension. The extension is a separate plugin that must be installed and activated next to Facebook Feed Pro.
Before you get started, make sure Facebook Feed Pro is installed and activated on your WordPress site. Each Page you want to use must also be connected as a source. You install the extension the same way as any other WordPress plugin.
Here is what we will cover.
- Turning On the Multifeed Extension
- Adding Several Sources to a Feed
- Showing Events From Several Pages
- Choosing How Many Posts Show
- Frequently Asked Questions
Turning On the Multifeed Extension
To get started, we’ll turn on the extension in your plugin.
- First, install and activate the extension plugin on your site.
- Next, from your WordPress admin sidebar, go to Facebook Feed » Extensions.
- Then find the Multifeed card. If it says Activate, click Activate.

If the card shows an Add link instead of Installed, the extension plugin isn’t on your site yet. The link opens the extension page in a new tab.
Once the extension is active, the card shows Deactivate where Activate was. You can now select more than one source for a feed.
Adding Several Sources to a Feed
To create a new feed with several sources, go to Facebook Feed » All Feeds in your WordPress admin sidebar.
- Click Add New. The Create a Facebook Feed screen opens.
- Choose a feed type. Then click Next.
- On the Select a Source screen, click each Page you want to include. With the extension active, each click ticks or unticks that Page and keeps the others as they are. You can tick as many as you like.
- If a Page isn’t in the list yet, click + Add New to connect it. Then tick it.
- Click Next. If the plugin shows a theme screen, choose a theme and click Next. Then choose a template and click Next. The feed then opens in the builder.

To add more sources to an existing feed, go to Facebook Feed » All Feeds and open the feed.
- Click the Settings tab. Then click Sources.
- Click Add New. The Update Source popup opens.
- Tick each Page you want the feed to show. Untick any Page you want to remove.
- Click Update. The preview refreshes with posts from all ticked sources.
- Finally, click Save in the top right.
With the extension active, the button in the Sources section reads Add New instead of Change. Each source in the list also has its own delete icon.
Showing Events From Several Pages
You can also combine events from several Pages in one Events feed. Events feeds need the Elite license level. To show events from several Pages, follow the steps above and choose the Events feed type.
Pages can only be selected for an Events feed if they are connected as an Events Source. In the source list, these Pages are marked “(events)”. A Page without that mark can’t be ticked. To connect a Page as an Events Source, click + Add New while the feed type is Events. The Connect an Events Source screen opens. Follow the prompts there. This connection uses your own Facebook app. Our guide on creating a Facebook events access token walks through that part.
To change the sources of an existing Events feed, use the steps in the section above. The events from all ticked sources then appear in the same feed.
Choosing How Many Posts Show
To change how many posts the feed shows, open the feed from Facebook Feed » All Feeds.
- Click the Customize tab. Then click Feed Layout.
- Under Number of Posts, set the value for Desktop and for Mobile.
- To change how many posts are requested from each Page, click the Settings tab. Then click Advanced.
- Next to API Post Limit, choose Manual. Then enter a number between 1 and 100 in the Enter API Post Limit box.
- Finally, click Save in the top right.

With the Multifeed extension, the API Post Limit applies to each Page. For example, with three Pages and a limit of five, the plugin asks for 15 posts in total, five from each Page. Leave API Post Limit on Automatic to let the plugin choose. Switch to Manual if you want to decide how many posts the plugin requests from each Page.
That’s it! You now know how to show posts from several Facebook Pages in one feed. To learn how to place the feed on your site, read our guide on displaying your Facebook feed on a page, post, or widget.
Frequently Asked Questions
Below, we’ve answered some of the most common questions about the Multifeed extension.
Why can I only select one source?
The Multifeed extension adds the option to select more than one source. Until it is active, the Sources section shows a Change button instead of Add New. If the Multifeed card under Facebook Feed » Extensions shows Activate, click it. If it shows Add, install and activate the extension plugin first.
In what order do the posts appear?
When a feed has more than one source and the extension is active, the plugin sorts the posts from all Pages together, newest first.
How many posts does the plugin request from each Page?
With the extension, the API Post Limit is the number of posts requested from each Page. Under Settings » Advanced, set it to Manual to choose your own number. The Number of Posts setting under Customize » Feed Layout then controls how many posts show in the feed.
How do I remove a source from a feed?
Open the feed and go to Settings » Sources. Click Add New, untick the Page, and click Update. Then click Save.
Why can’t I select a Page in my Events feed?
An Events feed only lets you select Pages that are connected as an Events Source. These Pages are marked “(events)” in the list. To connect one, click + Add New while the feed type is Events. The Connect an Events Source screen opens.